1-1/4" Weld-In Interlocking Tube Clamp Solid 1018 Steel · Superior Interlocking Strength · .095 & .120 Wall Compatible Precision-engineered for professional metal fabrication, our 1-1/4" O.D. Interlocking Tube Clamp is the ultimate "weld-in" solution for structural projects. Forged from solid 1018 cold-rolled steel (not cast), these bungs feature a tumble finish and an innovative interlocking design that provides exceptional joint strength for roll cages, roof racks, and bumpers. With non-threaded connectors for hassle-free alignment and stainless steel bi-directional hardware, this clamp allows for easy assembly even in the tightest spaces, ensuring a clean, streamlined finish for any structural build. Key Benefits Structural Interlocking Design: The precision-machined interlocking teeth provide a mechanical bond that ensures superior strength for roll cages and subframes. Bi-Directional Fastening: Versaslot design allows stainless steel bolts to be inserted from either direction, making tightening in cramped locations a breeze. Zero-Risk Alignment: Non-threaded bungs eliminate the risk of cross-threading. Alignment is effortless, and nuts are held in a secure pocketed cavity. Optimized Weld Adhesion: Built-in chamfered ends ensure deep weld penetration and clean, low-profile beads for a professional-grade finish. Dual Wall Compatibility: Specifically designed to fit standard 1.25" O.D. tubing with both .095 and .120 wall thicknesses. Low Profile Aesthetics: Overall height of just 1-7/8" to 2" ensures a compact, streamlined appearance on your custom project. Fabrication Guide Preparation: Clean the inner diameter of your 1-1/4" O.D. tubing (compatible with ID .99" - 1.04"). Tacking: Slide the bung halves into the respective tube ends and perform initial tack welds at the chamfered points. Alignment: Join the interlocking sections and run the stainless bolt through. Hand-tighten the Nyloc nut in the pocketed cavity. Final Weld: Complete the weld around the chamfered edge. The non-cast 1018 steel ensures excellent adhesion and strength. Professional Fabricator's Choice! Unlike cheap cast-iron alternatives, these are solid machined 1018 steel parts. They are designed to withstand high-stress environments and allow for powder coating clearances, keeping your custom bumpers and roof racks looking flawless for years. Technical Specifications Material Solid Machined 1018 Cold-Rolled Steel Compatibility 1-1/4" (1.25") Outside Diameter Tube Inner Diameter Fit .99" to 1.04" (I.D.) Wall Thickness Supports .095 and .120 Wall Tubing Overall Height Approx. 1-7/8" to 2" (Bolted) Hardware Type 1/4-20 Stainless Steel Socket Head + Nyloc Nut Finish Industrial Tumble Finish / Weld-Ready Packing List 2 x Bung Halves + 1 x Bolt + 1 x Nyloc Nut Ordering for a specialized fab shop?We offer bulk discounting for professional fabricators and off-road chassis builders. Message us on WhatsApp Frequently Asked Questions Can I use these for a full roll cage? Yes. These interlocking clamps are specifically designed for structural roll cage applications where a section needs to be removable. The 1018 steel and interlocking teeth provide the mechanical integrity required for safety rigs. What is the benefit of non-threaded bungs? Non-threaded bungs allow you to align the tubes easily without fighting damaged or dirty threads. By using an external Nyloc nut tucked into the machined pocket, you get a more reliable lock that won't vibrate loose on the trail. Are these rust-resistant? The main bung body is solid 1018 steel, which should be painted or powder-coated after welding to prevent rust. However, the included socket head bolts and nuts are made from high-quality stainless steel for lifelong rust protection.

Read more less

1-Channel Heavy Duty Rubber Cable Protector Ramp Kit 22,046 lbs Load Capacity · All-Weather Rubber · Interlocking Design Safeguard your valuable cables and ensure pedestrian safety with the Heavy Duty Cable Protector Ramp Kit. This robust system is designed to manage traffic flow and protect road cables, hoses, and power lines from damage in any environment. Crafted from durable, high-quality rubber with a non-slip surface, each ramp can support up to 22,046 lbs (10,000 kg). The bright black and yellow design ensures high visibility day and night, making it the perfect solution for parking lots, warehouses, concerts, event venues, and construction sites. Key Benefits Protect Cables from Heavy Traffic: With a massive 22,046 lb load capacity, you can safely drive cars, trucks, and forklifts over hoses and wires without damage. Ensure All-Weather Durability: Made from industrial-grade rubber that resists water, wear, and deformation, making it ideal for both indoor and outdoor use. Maximize Safety & Visibility: The bright yellow stripes on a black base provide clear visibility day and night, alerting drivers and pedestrians to potential trip hazards. Create Custom Lengths Easily: The interlocking modular design allows you to seamlessly connect multiple ramps to cover any distance required. Achieve Secure Installation: Pre-drilled mounting holes allow you to securely anchor the ramps to concrete or asphalt for permanent or long-term applications. Organize and Protect Wires: A spacious single channel (1.1" W x 0.8" H) keeps power lines, hoses, and network cables neatly organized and safe from harm. Easy Installation Lay out the ramp sections in your desired location, connecting them with the interlocking system. Place your cables, wires, or hoses neatly inside the single channel. For temporary use, the weight of the ramps is often sufficient. For permanent or high-traffic use, use the included screws to anchor the ramps to the ground through the pre-drilled mounting holes. The Professional Solution for Cable Safety. This kit provides everything you need to create a safe, organized, and durable crossover point for vehicles and pedestrians, giving you peace of mind at any job site or event. Technical Specifications Material High-Quality Rubber & PVC Weight Capacity 22,046 lbs / 10,000 kg Channel Count 1 Product Dimensions (Each) 40" L x 6" W x 1.2" H (102 x 15.5 x 3 cm) Single Channel Dimensions 1.1" W x 0.8" H (2.8 x 2 cm) Item Weight (Each) 6.83 lbs / 3.1 kg Color Black + Yellow Package Contents 3-Piece Kit Includes: 4-Piece Kit Includes: • 3 x Cable Protector Ramps• 20 x Screws • 4 x Cable Protector Ramps• 20 x Screws (or 26, depending on model) Need a large quantity for a worksite or have a question about installation?Our expert team is here to provide guidance and bulk pricing for your projects. Message us on WhatsApp Frequently Asked Questions Can I drive a large truck over this ramp? Yes. With a weight capacity of 22,046 lbs (10,000 kg), this cable protector is designed to handle the passage of most standard cars, vans, trucks, and forklifts safely. How long of a ramp can I make? The system is completely modular. You can connect as many ramps as you need end-to-end to cover any distance, whether it's a single doorway or the entire length of a parking lot. Can I use this on a gravel driveway or on grass? For best results and maximum stability, these ramps should be placed on a hard, flat surface like asphalt or concrete. While they can be used on soft surfaces, we recommend placing a solid subfloor (like a sheet of plywood) underneath first to prevent them from sinking. Are screws for mounting included in the package? Yes, both the 3-piece and 4-piece kits come with a set of mounting screws, allowing you to securely fasten the ramps for more permanent installations if needed. ```

Read more less

ACS 10 Pack Aluminum Stage Light O-Clamps Adjustable 3-Size Fit (1"/1.5"/2") · 15KG Load · High-Density ABS Discover the ultimate in rigging versatility with the ACS 10-Pack Adjustable O-Clamps. Unlike standard metal clamps that only fit one size, these innovative clamps feature a removable insert system, allowing them to fit three distinct pipe diameters: 1" (25mm), 1.5" (38mm), and 2" (50mm). Constructed from high-strength Acrylonitrile Butadiene Styrene (ABS) plastic, they offer a secure, scratch-free grip on your truss. With a load capacity of 33lbs (15kg), they are the perfect lightweight solution for mounting LED Pars, effect lights, and spotlights for DJs, bars, and theaters. Key Benefits 3-in-1 Adjustable Fit: Includes removable inserts to fit three common pipe sizes: 1 inch, 1.5 inch, and standard 2 inch (F34) truss. Scratch-Free Material: Made from durable ABS plastic, these clamps will not scratch or damage your expensive aluminum trussing or lighting bars. 15KG Load Capacity: Sturdy enough to support up to 33 lbs (15kg), making it ideal for the vast majority of static stage lights and LED effects. 360° Wrap Security: The O-Clamp design wraps completely around the pipe for maximum stability and security, ensuring your lights stay exactly where you aim them. Tool-Free Operation: Features a large wingnut for tightening the clamp and a standard 10mm bolt for attaching the fixture, requiring no tools for standard use. 10-Piece Value Pack: This set includes 10 complete clamps with all necessary inserts, providing great value for mobile DJs and event planners. How to Adjust Size Mode 1 (1"/25mm): Use both inner inserts inside the clamp. Mode 2 (1.5"/38mm): Remove the smaller inner insert, leave the larger one. Mode 3 (2"/50mm): Remove all inserts to fit standard Global Truss/F34 pipes. Tip: Use a small screwdriver to gently pry out the inserts if they are tight. One Clamp for All Pipes. Never worry about having the wrong size clamp again. Whether you are using a thin decorative bar or a heavy-duty main stage truss, these adaptable ABS clamps can handle the job while protecting your gear from scratches. Technical Specifications Material High-Density ABS Plastic Color Black Fit 1 25 mm (1 Inch) - With inserts Fit 2 38 mm (1.5 Inch) - With partial inserts Fit 3 50 mm (2 Inch) - Without inserts Load Capacity 15 KG (33 lbs) Threaded Bolt Size 10 mm Packing Quantity 10 Pieces / Pack Have questions about compatibility?Our expert team is available to ensure you get the right hardware for your stage. Message us on WhatsApp Frequently Asked Questions Are these metal or plastic? These clamps are made from high-quality, heavy-duty ABS Plastic. This material is chosen because it is strong, lightweight, and most importantly, it will not scratch or damage your truss pipes like metal clamps can. Can I use this for a heavy moving head? The maximum load capacity is 15kg (33 lbs). While this is sufficient for many small to medium fixtures, we recommend using our Heavy Duty Metal clamps (rated for 100kg) for heavy moving heads or large speakers. Does it come with the inserts? Yes! Each of the 10 clamps in the pack comes pre-loaded with the full set of inserts, ready to use out of the box. What is the bolt size? The clamp includes a standard 10mm threaded bolt for attaching your light fixture.

Read more less

10 PCS No-Flame Cold Spark Fountain System with Control Base for Weddings & Events Ten remote-ready effect bases · Long-range control · Easy, repeatable visual moments Design elegant, low-heat visual moments for ceremonies and celebrations with this complete 10-unit system. Each unit sits on a stable control base and is operated wirelessly from a handheld controller, letting you time multiple effect bursts precisely — ideal for entrances, finales, and staged highlights at indoor or outdoor venues. Your browser does not support the video tag. Key Benefits Coordinated control: Trigger all ten units together for a synchronized effect or fire them in sequence to create choreographed patterns. Flexible placement: Battery-operated bases remove the need for mains power, so you can position units where they have the best visual impact. Reliable remote range: The included controller supports operations beyond 70 meters, making timing easy from backstage or the audience edge. Transport-ready kit: The set comes with everything organized for quick setup and safe storage — perfect for touring or frequent events. Simple to use: Designed for event teams — load the effect cartridge, set the base, and control the show from a single handheld unit. Suited for special moments: Ideal for creating dramatic entrances, touching highlights, or a polished closing moment that guests remember. Quick Setup Insert two fresh AA batteries into each of the ten control bases (batteries not included). Place one compatible visual-effect cartridge into the receptacle on each base. Arrange the units where they are most visible and secure them on stable surfaces. Stand at a safe distance and use the wireless controller to activate the effects as needed. Professional-looking effects with minimal fuss. This kit gives event teams the tools to produce consistent, repeatable visual highlights with easy, push-button operation. Technical Specifications Control Mode Wireless handheld controller Controller Range Approx. 70 meters (230 ft) Power (Receivers) 2 × AA batteries per base (not included) Refill Compatibility Visual-effect cartridges / refills with diameter < 4.3 cm Construction Durable plastic & metal components Notice: Requires AA batteries and specific Certified Composite Inserts to operate (Sold Separately). [View System Hardware] Need a bulk order for a large event or have special requirements?Our team is ready to help you plan an unforgettable show.  Message us on WhatsApp Frequently Asked Questions Are consumable accessories included? No — consumable accessories are sold separately. Please confirm compatibility before purchasing replacements. Is this safe to use indoors? This system is designed for low-heat visual effects. Still, always follow venue rules, allow for ventilation, and keep a safe clearance from flammable materials and overhead obstructions. How many batteries are required? Each base requires 2 AA batteries. For 10 bases, you’ll need 20 AA batteries in total. Can units be triggered individually? Yes — the controller supports both simultaneous activation and selective triggering so you can produce sequential patterns or single-unit highlights.

Read more less

10 PCS Stage Light Aluminum Foldable Hook Clamps 150KG Load Capacity · Fits 40-60mm Pipe · Heavy Duty Anti-Slip Design Upgrade your rigging efficiency with this professional set of 10 Foldable Stage Light Hooks. Crafted from premium aluminum alloy, these clamps are designed for the demanding environment of touring and live events. The unique foldable design allows the clamp to remain attached to your moving heads or beam lights while fitting perfectly inside flight cases, saving you valuable setup time. With a robust load-bearing capacity of 150KG (330 lbs) and an anti-slip tooth design, these hooks provide unmatched security for your heaviest fixtures on trusses ranging from 40mm to 60mm in diameter. Key Benefits Massive 150KG Load: Engineered for heavy-duty performance, each clamp supports up to 150KG (330 lbs), making them ideal for large moving heads and professional beam lights. Smart Foldable Design: The clamp folds flat, allowing you to leave it attached to the fixture base when packing into flight cases—a huge time-saver for touring crews. Wide Truss Compatibility: Designed with flexibility in mind, the adjustable knob fits a wide range of pipe diameters from 40mm to 60mm, ensuring a secure fit on various rig types. Anti-Slip Security: Features a specialized anti-slip tooth design on the inner grip, which bites into the truss to prevent rotation and slipping under heavy loads. Quick Installation: Equipped with a standard 10mm threaded bolt and a large, easy-grip wing knob for rapid, tool-free mounting on the truss. 10-Piece Value Set: This lot includes 10 high-quality clamps, providing a cost-effective solution for outfitting multiple fixtures in your lighting rig. Installation Instructions Attach the fold hook to the bottom of your lighting fixture using the included 10mm bolt. Unfold the clamp to the open position (if stored folded). Hook the clamp over your truss or pipe (40-60mm diameter). Tighten the large side knob firmly to secure the fixture in place. The Touring Professional's Choice. The foldable design completely changes the game for mobile DJs and touring acts. No more removing clamps after every show—simply fold them down, case the light, and you're ready to go. Combined with a 150KG capacity, it's the ultimate blend of convenience and strength. Technical Specifications Material Premium Aluminum Alloy Fit Pipe Diameter 40mm - 60mm (1.57" - 2.36") Load Capacity 150 KG (330 lbs) per pc Threaded Bolt Size 10 mm (M10) Product Weight 0.31 KG / pc Features Anti-Slip Teeth, Foldable Mechanism Compatible Fixtures Moving Heads, Beam Lights, Heavy LED Pars Packing Quantity 10 Pieces / Lot Need help with bulk orders for your venue?Our expert team is available to ensure you get the right hardware for your stage. Message us on WhatsApp Frequently Asked Questions Why is the foldable design better? Foldable hooks can collapse against the base of the light. This means you don't have to unscrew the clamp when putting the light back into its flight case, saving significant time during setup and teardown. Will this fit my truss? These clamps have a versatile range, fitting pipes from 40mm up to 60mm. This covers almost all standard professional truss systems (which are typically 48-52mm). What is the bolt size? The clamp comes with a 10mm (M10) threaded bolt. Please ensure the mounting bracket on your lighting fixture can accept a 10mm bolt. Can this hold a heavy moving head? Yes. With a load capacity of 150KG (330 lbs), these are specifically designed for heavy-duty fixtures like moving head beams, spots, and washes.

Read more less

10 PCS Stage Lighting Clamp Bracket (Black) Fits 30-50mm Truss · 20kg Load Capacity · Anti-Slip Aluminum Alloy Streamline your stage setup with this 10-pack of professional Black C-Clamp Hooks. Designed for speed and durability, these clamps are crafted from high-quality aluminum alloy with a sleek black finish that blends perfectly into dark stage environments. The versatile design fits a wide range of truss and pipe sizes (1.18" to 2"), making them essential for mobile DJs, theaters, and event organizers. Featuring specialized anti-skid teeth, they provide a rock-solid grip for LED pars, effects lights, and pin spots, ensuring your equipment stays safe and secure. Key Benefits Premium Aluminum 6061: Constructed from heavy-duty aluminum alloy that is impact-resistant, lightweight, and designed to resist deformation over time. Versatile Pipe Fit: The adjustable screw allows the clamp to fit any pipe diameter from 1.18 inches (30mm) up to 2 inches (50mm), covering almost all standard truss types. Anti-Skid Teeth Design: Engineered with internal "teeth" that bite onto the truss pipe, preventing the light from slipping, rotating, or vibrating loose during shows. Black Rust-Proof Finish: The electroplated black coating offers excellent rust resistance and a professional "invisible" look that doesn't reflect stage glare. Quick Installation: Features a tool-free wingnut for tightening onto the truss and a standard 8mm threaded bolt for attaching to your lighting fixture. 10-Piece Value Pack: This set includes 10 heavy-duty clamps, providing excellent value for fully equipping a lighting rig or keeping spares in your tool case. Installation Guide Screw the clamp's 8mm bolt into the mounting bracket of your light fixture. Hook the C-clamp over the truss pipe (ensure pipe diameter is between 30-50mm). Tighten the large adjustable knob securely by hand. Ensure the anti-skid teeth are gripping the pipe firmly before releasing the light. Ideal for C-Stand & Truss. The C-Clamp design is the industry standard for fast setups. Whether you are hanging lights on a 2-inch Global Truss or a smaller 35mm lighting stand bar, these clamps adjust to fit securely. Technical Specifications Material Aluminum Alloy 6061 Color Black Fit Pipe Diameter 30mm - 50mm (1.18" - 2.0") Load Capacity 20 KG (44 lbs) Threaded Bolt Size 8 mm Dimensions 4.53" x 2.56" (115 x 65mm) Style C-Clamp Hook Packing Quantity 10 Pieces / Pack Need help calculating load limits?Our expert team is available to ensure you get the right hardware for your stage. Message us on WhatsApp Frequently Asked Questions Will this fit a 2-inch truss? Yes. The clamp opens wide enough to fit standard 2-inch (50mm) truss pipes, commonly used in professional stage rigging (F34 etc.). What is the weight limit per clamp? Each clamp has a maximum load capacity of 20kg (44 lbs). It is perfect for LED Pars, derby lights, and small moving heads. For very heavy fixtures, we recommend using a fully wrapping O-Clamp. Does it include the bolt for the light? Yes, each clamp comes with an 8mm threaded bolt and nut assembly attached, ready to be screwed into the mounting bracket of your lighting fixture. Will these rust outdoors? They are highly resistant to rust. Made from aluminum alloy (which naturally resists corrosion) and finished with a black electroplating, they are suitable for outdoor use.

Read more less

10 PCS Stage Lighting Aluminum Clamp Brackets Fits 35-52mm Pipe · 20kg Load Capacity · Lightweight & Durable Streamline your lighting setup with this 10-piece set of premium Aluminum Stage Lighting Clamps. Designed for versatility and speed, these C-Hook style brackets are perfect for DJs, bands, and stage technicians. Made from high-grade aluminum, they offer a lightweight yet durable solution for mounting LED Par cans, spotlights, and effects. With an adjustable knob that fits standard truss sizes from 1.5 to 2 inches (35-52mm) and a safe load capacity of 20kg (44lbs), these clamps ensure your light fixtures are secure while remaining easy to install and remove. Key Benefits Universal Truss Fit: The adjustable screw knob allows the clamp to securely grip any pipe or truss with a diameter between 35mm and 52mm (1.5" - 2"). Durable Aluminum Build: Crafted from superb aluminum materials, these hooks are rust-resistant and built to last while remaining lightweight for portable rigs. Great Value 10-Pack: Comes as a complete set of 10 clamps, making it an economical choice for outfitting a full lighting bar or truss system. Secure Non-Slip Grip: The C-shaped hook features a textured "tooth" design on the inner curve to bite into the pipe, preventing unwanted slipping or rotation. Tool-Free Installation: Features large wingnuts for both the pipe attachment and the light fixture, allowing for quick hand-tightening without needing wrenches. 20KG Load Capacity: Perfect for standard stage equipment, supporting up to 44 lbs (20kg) per clamp—ideal for LED pars, derby lights, and lasers. Simple Installation Guide Attach the clamp to your lighting fixture using the provided bottom bolt and wingnut. Hook the C-clamp over your truss or pipe (ensure diameter is 35-52mm). Tighten the large side knob firmly by hand until the clamp securely grips the truss. Connect a safety cable (not included) for added security when mounting overhead. Quick & Practical. Unlike fully enclosed O-clamps, the open "C" design allows you to hook lights onto the truss instantly without having to slide them on from the end or completely disassemble the clamp. It's the ultimate time-saver for mobile DJs. Technical Specifications Material High-Grade Aluminum Color Silver Fit Pipe Diameter 35mm - 52mm (1.5" - 2.0") Max Load Capacity 20 KG (44 lbs) Clamp Width 20 mm Dimensions 72mm x 70mm x 20mm Fixture Mount Adjustable Wingnut Bolt Style C-Hook / Open Clamp Packing Quantity 10 Pieces / Pack Need advice on load limits or truss compatibility?Our team is available to help you choose the right hardware for your stage. Message us on WhatsApp Frequently Asked Questions What size pipe does this fit? This clamp is designed with an adjustable knob to fit pipes ranging from 35mm (1.5 inches) up to 52mm (2 inches), covering most standard truss and lighting stands. Can I hang heavy moving heads with this? These clamps have a maximum load capacity of 20kg (44lbs). They are excellent for LED par cans, small effect lights, and spotlights. For heavy moving heads exceeding 20kg, we recommend using our heavy-duty 100kg O-clamps instead. Do I need tools to install these? No. These clamps are designed with wingnuts and hand-turnable knobs, allowing for a completely tool-free installation and removal process. Are these made of plastic or metal? These are made from high-quality Aluminum. They are much more durable and reliable than plastic clamps, yet they remain lightweight for easy transport.

Read more less

10-Pack Professional 3-Pin DMX Signal Cables Oxygen-Free Copper Core · Multi-Layer Shielding · Available in 1m/2m/3m Equip your entire lighting rig with our 10-Pack Professional DMX Signal Cables. Specifically designed for high-fidelity stage lighting systems, these cables feature a 100% Oxygen-Free Copper (OFC) core and high-performance double shielding (Foil + Pure Copper Braid) to ensure lossless transmission and zero EMI/RFI interference. Constructed with heavy-duty black zinc metal shells and high-strength nylon tail sleeves, these XLR male-to-female lines are engineered for the high-intensity environments of touring rigs, nightclubs, and live concerts. Choose between 1m, 2m, or 3m lengths to perfectly organize your master-slave chains or controller-to-fixture setups. Key Benefits Oxygen-Free Copper Core: High-purity OFC conductors provide maximum signal clarity and minimal resistance for long-distance DMX runs. Lossless Signal Transmission: Multi-layer shielding targets and neutralizes EMI/RFI noise, ensuring your light show never flickers or drops signal. Heavy-Duty Zinc Shell: Professional black zinc metal connectors provide rugged impact resistance and a secure locking mechanism. FPE Low-Capacitance Design: Foamed polyethylene insulation maintains low capacitance values, essential for high-speed digital DMX data flow. Flexible PVC Outer Skin: Soft, corrosion-resistant, and anti-aging PVC material allows for easy cable management and high-frequency bending. 10-Pack Bulk Value: Get massive coverage for your entire stage rig with a coordinated set of ten professional cables at a bulk discount. Professional Setup Guide Connect the 3-pin XLR male end to your DMX controller or the "DMX Out" port of your main fixture. Route the cable to the "DMX In" port of the following lighting fixture in the chain. Push until the self-locking connector clicks to ensure a secure, road-vibration-proof grip. Use the different lengths to manage cables across truss lines, keeping your rig organized and safe. Maximum Inventory Value! This package includes a total of 10 professional-grade DMX cables. Available in three sizes: 1M (3.2ft), 2M (6.5ft), and 3M (9.8ft). This bulk pack is the most cost-effective way to fully equip a professional venue or touring inventory. Technical Specifications Conductor Material 100% Oxygen-Free Pure Copper (OFC) Shielding Design Double Shielded (Tin Foil + Pure Copper Braided Net) Connector Housing Black Zinc Metal Shell + Silver Plated Pins Insulation Type FPE Foamed Polyethylene (Low Capacitance) Outer Jacket Soft Anti-Aging PVC (Non-Toxic) Connector Type Standard 3-Pin XLR Male to Female Available Lengths 1M (3.2ft) / 2M (6.5ft) / 3M (9.8ft) Packing List 10 x 3-Pin DMX Signal Cables Configuring a large stadium or nightclub installation?We offer further bulk discounts and customized lengths for large-scale production orders. Message us on WhatsApp Frequently Asked Questions Can these be used for professional audio microphones? Yes. While they are specifically optimized for DMX digital data with low-capacitance insulation, they use 100% OFC cores and standard 3-pin XLR connectors, making them excellent for high-fidelity microphone and studio signals as well. What is the advantage of Foamed Polyethylene (FPE)? FPE insulation creates a lower capacitance environment inside the cable. This is vital for digital DMX signals, as it prevents signal smearing and data timing errors over long cable chains, ensuring your lights respond instantly. Are the connectors resistant to physical damage? Yes. The black zinc metal shell provides heavy-duty protection against impacts and heavy footsteps. Additionally, the high-strength nylon tail sleeve prevents the cable from kinking or pulling at the critical weld points, maximizing road-life.

Read more less

10-Pack Horizontal Cable Lacing Bars for 19" Racks Straight Solid Steel · TAA Compliant · High-Density Bulk Pack Streamline your server rack installation and reduce costs with this 10-pack of Horizontal Cable Lacing Bars. Designed for universal 19-inch racks, these bars feature a straight, solid round-steel construction that provides a rigid mounting point to offload the weight of heavy cable bundles. By reducing the tension on your rack-mount equipment's ports, you protect your hardware from damage while maintaining a professional, organized appearance. This bulk pack is ideal for large-scale implementations, significantly reducing packaging waste and shipping costs for contractors and data center managers. Key Benefits Protects Equipment: Offloads cable weight to the steel bar, reducing strain on delicate ports and preventing connection failure. Bulk 10-Pack Value: Includes 10 lacing bars in one package to lower shipping costs and reduce packaging waste for volume installs. Optimized Airflow: Proper cable routing clears the rear of the rack, enhancing passive cooling to keep equipment at optimal temperatures. Solid Round Steel: Constructed from solid steel with a round design for maximum weight capacity—won't bend like flat bars. Space Saving Design: Ultra-slim profile occupies just one-third of a rack unit (U) at each install point, maximizing rack density. TAA Compliant: Fully compliant with the Trade Agreements Act (TAA) and EIA/ECA-310-E standards for government and industrial use. Installation & Usage Mount the bar horizontally on the front or rear 19-inch rails of your rack. Secure the bar using standard rack screws (sold separately). Run your cables along the bar to route them towards their destination. Secure cables to the solid steel bar using cable ties to relieve tension from the equipment ports. Extend Your Equipment Life! Constant strain on cable ports is a leading cause of hardware failure. By using these lacing bars to support the weight of your cabling, you drastically reduce the risk of intermittent signal loss and port damage. Technical Specifications Product ID CMLB10 Material Solid Round Steel Pack Quantity 10 Bars Orientation Horizontal Rack Height 1/3 U (0.33 U) per bar Compatibility EIA/ECA-310-E Compliant Warranty 2 Years Need a bulk order for a large facility?We specialize in supply for large-scale data center contractors. Message us on WhatsApp Frequently Asked Questions Why choose round bars over flat ones? Round solid-steel bars offer higher weight capacity and rigidity compared to flat bars, which can bend easily under the weight of heavy cable bundles. This ensures your cables remain securely supported. Are these compatible with any rack? Yes, these bars are EIA/ECA-310-E compliant and fit standard 19-inch server racks. They can be installed on either the front or rear rack rails depending on your cabling needs. What is the benefit of the 10-pack? The 10-pack is designed for large-scale implementations. It significantly reduces packaging volume and lowers shipping costs compared to buying individual units, making it ideal for data center build-outs.

Read more less

10-Pack Premium Balanced XLR & DMX Signal Cables 3.2ft (1M) Length · Oxygen-Free Copper · Pro Zinc Alloy Locking Connectors Equip your stage, studio, or DJ booth with our 10-Pack of Premium 1M Balanced XLR Cables. Engineered for high-performance durability, these cables offer the ultimate versatility, serving as both high-fidelity microphone cords and reliable DMX512 signal lines for your lighting rig. Each cable features an Oxygen-Free Copper (OFC) core, foil shielding, and a copper braided net to guarantee lossless transmission and complete EMI/RFI protection. Housed in rugged zinc alloy shells with integrated cable locks, these 3.2ft cords are essential for maintaining a clean, professional signal path in high-traffic nightclubs and live event environments. Key Benefits Triple Layer Shielding: Foil shielding plus a high-density copper braid blocks 99% of interference, ensuring pure audio and stable DMX data flow. Oxygen-Free Copper (OFC): The high-purity copper core delivers lossless transmission for high-fidelity sound and reliable digital lighting control. True DMX512 Compatibility: Built with 110-ohm impedance characteristics, perfect for DMX controllers, moving heads, par lights, and fog machines. Heavy-Duty Metal Connectors: Premium zinc alloy shells with silver-plated pins and self-locking mechanisms provide a secure, vibration-proof connection. Soft & Flexible Jacket: Durable PVC outer skin and internal anti-pull cotton cord allow for easy management and long-lasting road use. Bulk 10-Pack Value: Equipping a full rig? Get massive savings and coordinated signal cables for your entire stage inventory with this 10-piece set. Professional Rigging Guide Connect the 3-pin XLR male plug into your audio mixer output or DMX lighting controller. Route the 1M cable to your first active speaker, microphone, or lighting fixture. Push the connector firmly into the port until the self-locking latch "clicks" for a secure hold. Daisy-chain fixtures for lighting or run individual lines for audio to create an organized, professional setup. Professional 10-Pack Bulk Discount! This listing is for a complete 10-pack bundle of our premium 1M (3.2ft) cables. This is the most cost-effective way to fully equip a professional venue, recording studio, or touring rig with high-quality, dual-mode signal hardware. Technical Specifications Connector Type 3-Pin XLR Male to Female (Balanced) Conductor Material 100% Oxygen-Free Pure Copper (OFC) Shielding Design Triple Layer (Foil + Braided Copper + Cotton Cord) Jacket Material High-Flex Anti-Pull Soft PVC Shell Material Zinc Alloy Metal with Cable Locks Total Length 1 Meter / 3.2 Feet Compatibility True DMX512 & Studio Balanced Audio Packing List 10 x 1M Premium Balanced XLR/DMX Cables Upgrading your entire nightclub or studio inventory?We offer customized length options and larger bulk discounts for event rental companies. Message us on WhatsApp Frequently Asked Questions Are these cables suitable for studio recording? Yes, absolutely. The Oxygen-Free Copper core and triple shielding ensure an extremely low-noise signal path, making these ideal for recording microphones, studio monitors, and balanced audio gear. Can I use these to connect my DMX lights? Yes. These cables are engineered with the high-speed data transmission and low-capacitance requirements of the DMX512 protocol, ensuring your lighting fixtures respond instantly and without flickering. What is the purpose of the cotton cord inside? The anti-pull cotton cord provides structural strain relief. It absorbs physical tension from accidental pulls or heavy coiling, protecting the internal copper conductors from snapping or stretching, which significantly extends the cable's lifespan.

Read more less

Aluminum Stage Light C-Clamp Hooks (10/20 Pack) Fits 30-50mm Pipe · 6061 Aluminum Alloy · Rust-Resistant Black Finish Secure your lighting rig with confidence using these premium Stage Light Clamp Hooks, available in value packs of 10 or 20. Constructed from high-hardness 6061 Aluminum Alloy, these C-clamps offer superior impact resistance and durability compared to standard steel hooks. The professional black finish not only looks sleek on stage but effectively prevents rusting. Designed for versatility, the adjustable screw knob allows these clamps to fit a wide range of truss sizes from 1.18" to 2" (30-50mm), making them the perfect solution for hanging LED Pars, effects lights, and beam spots. Key Benefits Premium 6061 Alloy: Made from high-grade 6061 Aluminum, offering excellent hardness and impact resistance without deforming or breaking under load. Versatile Fit Range: The adjustable design fits truss pipes with outer diameters ranging from 1.18 inches (30mm) up to 2 inches (51mm). Black Rust-Proof Finish: The sleek black coating provides a professional "stealth" look for stage environments while actively protecting against corrosion. 20KG Load Capacity: Capable of supporting up to 44 lbs (20 kg), these clamps are ideal for LED pars, derby effects, pin spots, and light-weight moving heads. Easy Installation: Features a standard 8mm threaded bolt for the fixture and a hand-adjustable knob for the truss, allowing for tool-free setup and removal. Bulk Quantity Options: Available in both 10-piece and 20-piece sets, offering great value for outfitting DJ booths, bars, churches, and theaters. Installation Guide Attach the clamp to your lighting fixture using the provided 8mm threaded bolt. Hook the C-clamp over your truss or pipe (ensure diameter is 30-50mm). Tighten the adjustable bolt knob firmly until the light is secure. Always attach a safety cable (not included) when hanging lights overhead. Professional "Stealth" Look. The matte black finish helps these clamps disappear against black trussing and dark ceilings, ensuring the audience focuses on your light show, not your hardware. Perfect for upscale events and theater productions. Technical Specifications Material Aluminum Alloy 6061 Color Black Fit Pipe Diameter 30mm - 50mm (1.18" - 2.0") Load Capacity 20 KG (44 lbs) Threaded Bolt Size 8 mm Style C-Clamp Hook Application LED Pars, Effects, Spotlights Packing Quantity Select: 10 Pieces or 20 Pieces Need help choosing the right size?Our expert team is available to ensure you get the right hardware for your stage. Message us on WhatsApp Frequently Asked Questions Will this fit a 2-inch truss? Yes. The adjustable bolt allows it to fit any pipe with a diameter between 1.18 inches (30mm) and 2.0 inches (51mm), which covers most standard truss sizes. What is the weight limit per clamp? Each clamp has a maximum load capacity of 20kg (44 lbs). It is perfect for lightweight fixtures. For heavy moving heads exceeding 20kg, we recommend using our Heavy Duty O-Clamps. Does it include the bolt for the light? Yes, each clamp comes with an 8mm threaded bolt attached, ready to be screwed into the mounting bracket of your lighting fixture. How many clamps do I get? We offer two options: a 10-piece set and a 20-piece set. Please ensure you select the quantity that best suits your needs before purchasing.

Read more less

1000W IP65 Waterproof DMX Strobe Light 3-In-1 LED 1000W Hybrid Power · IP65 Waterproof · 270° Tilt Movement Unleash a torrent of light with the 1000W IP65 Strobe, a professional-grade 3-in-1 lighting fixture designed for the most demanding environments. This powerhouse combines an intensely bright 144-LED white strobe with a vibrant 480-LED RGB surface, allowing for stunning layered effects from strobing to color washing. Its rugged, IP65-rated housing ensures flawless performance in any weather, while the 270° motorized tilt provides dynamic positioning. With multi-zone pixel control and versatile DMX modes, it's the ultimate tool for concerts, festivals, architectural lighting, and large-scale events. Key Features ▼ ✅ Dual light source with powerful white LEDs for strobing and full RGB LEDs for surface color effects. ✅ Dynamic 270° motorized tilt with adjustable speed for precise light positioning. ✅ Advanced pixel control with 4-segment control for the white strobe and 8-segment control for the RGB background. ✅ IP65 waterproof rating makes it perfect for outdoor tours, festivals, and events in any weather. ✅ Variable speed, two-way rainbow and color flow effects for creating breathtaking visuals. Need a custom lighting solution or have technical questions? Chat with our lighting experts on WhatsApp. How To Use Mount the fixture securely to a truss or surface using appropriate clamps. Connect the waterproof power cable to a suitable power source (AC100-240V). Connect a DMX cable from your controller to the DMX IN port. To link multiple units, use the DMX OUT port. Use the onboard LCD display and 4 buttons to select the desired control mode (e.g., 7CH, 14CH, 42CH) and set the DMX address. Operate the light via your DMX controller, or select a built-in Demo or Manual mode for standalone operation. After use, power down the unit and safely disconnect all cables. 💡 Silent & Powerful: This unit features a fan-less natural cooling system. Enjoy 1000W of raw power with zero operational noise, making it ideal for both roaring festivals and quiet theatrical stages. Technical Specifications Input Power AC100-240V, 50/60Hz Total Power 1000W Light Sources Strobe: 144pcs White LEDs Surface Effect: 480pcs 0.5W RGB 3in1 LEDs Illuminance 14500 Lux @ 1m Strobe Effect 0.3 - 20 Hz Dimmer 0–100% Linear Dimmer Tilt Angle 270° Control Modes DMX512 / Demo / Manual / RDM DMX Channels 7 / 14 / 42 CH IP Rating IP65 Waterproof Cooling System Natural Cooling (No Fan) Body Material Aluminum Alloy Net Weight 12 kg Body Size 535 x 152 x 300 mm Packing List Item Quantity ACS 1000W Strobe Light 1 pc Waterproof Power Cable 1 pc Waterproof DMX Signal Cable 1 pc User Manual 1 pc Important Notice This fixture is IP65 rated, suitable for outdoor use. To maintain the waterproof seal, ensure all power and signal connections are securely fastened. Always use professional-grade mounting hardware for safe installation. FAQs ▼ Q: What does IP65 mean? Can I use it in heavy rain?A: Yes. An IP65 rating means the fixture is fully protected against dust ingress and low-pressure water jets from any direction. It is designed to be used safely in rain and other outdoor weather conditions. Q: What is the difference between the 7CH, 14CH, and 42CH DMX modes?A: These modes offer different levels of control. 7CH is a basic mode for simple effects. 14CH (Standard) provides more detailed control over strobe, color, and tilt. 42CH (Extension) offers maximum control, including individual segment control of the LEDs for complex pixel-mapping effects. Q: Does this light make a lot of noise?A: No. It uses a fan-less natural cooling system with a large aluminum radiator body, ensuring completely silent operation. This makes it ideal for noise-sensitive environments like theaters or TV studios. Q: Can I control multiple units with one DMX controller?A: Absolutely. You can "daisy-chain" multiple lights by connecting the DMX OUT port of one fixture to the DMX IN port of the next. Just ensure each light is set to a unique DMX address for independent control. Q: What is RDM?A: RDM stands for Remote Device Management. It allows you to change settings like the DMX address, control mode, and check sensor status remotely from an RDM-compatible controller, without needing to physically access the fixture's display panel.

Read more less