350W Wireless DMX Battery Cold Spark Machine Battery-powered • Built-in Wireless DMX • 1–3 m Adjustable Height • Fast Warm-up Professional cold spark fountain effect designed for weddings, live shows, and rental productions. The unit features a built-in battery, on-board wireless DMX, and a TFT/LCD interface. Warm up in about 5 minutes, then trigger precise bursts from 1 to 3 meters with DMX or the 16-key remote. Non-pyro effect, low residue, and multiple safety protections for reliable indoor/outdoor use. Key Features Battery powered freedom — cable-free placement for aisles, beach or outdoor sets; fast 3-hour recharge. Built-in wireless DMX — set groups, frequency, master/slave, and chase patterns without extra receivers. DMX-512 (3 channels) — height, clean/purge, heating control; also supports standard 3-pin wired DMX. 1–3 m adjustable height — precise control via DMX channel 1 or remote (High / Mid / Low). 400 g hopper, approx. 14 g/min output for consistent, dense cold spark plumes. TFT/LCD display — temperature, voltage, status, DMX address, and wireless info at a glance. Safety first — tip-over sensor, over-temperature protection, status warnings and lockouts. Technical Specifications Power (machine) DC 24 V; max power approx. 350 W; 15 A fuse for over-current protection. Battery DC 24 V / 10 A; up to ~1.5 h heated standby; up to ~2 h continuous spray depending on use. Charger Input AC 100–240 V; Output 29.4 V / 5 A; red = charging, green = full; full charge about 3 h. Warm-up Time ≈ 5 minutes (ready indicator on display). Spray Height Approx. 1–3 m adjustable (DMX CH1 value increases height; remote High/Mid/Low). Hopper / Output Hopper 400 g; output ≈ 14 g/min. Control Modes On-board LCD; 16-key IR remote; DMX-512 (3 channels); built-in wireless DMX (3 channels). DMX Channels CH1 Height (0–10 off; 11–255 on, higher = taller); CH2 Clean/Purge (150–255); CH3 Heating (0–199 on; 200–255 off). Dimensions / Weight ≈ 220 × 145 × 198 mm; net 5.4 kg; gross 6.2 kg (approx.). Operating Conditions Max ambient 40°C; use on level surface with ventilation; keep ≥ 50 cm clearance around unit. Control Details (DMX / Wireless / Remote) DMX-512 (3CH) — CH1 height, CH2 purge/clean, CH3 heating enable/disable. Wireless DMX — set frequency 1–6, master/slave, chase count and ID for groups. 16-key Remote — High / Mid / Low, timed 5s/10s shots, purge, chase 1–6, speed ±, and more. Safety & Notes Minimum safety distance: 3 m from people and combustibles; cold spark must only disperse in air. Do not touch nozzle or housing while operating — surfaces can be hot; unit has tip-over and over-temp protection. Use grounded power; never connect to dimmer circuits; keep children away; wear eye protection near effects. Run purge/clean before and after every show to avoid clogging and extend service life. In case of fire, use a dry powder extinguisher (do not use water/foam/CO₂ types). What’s in the Box Wireless DMX Battery Cold Spark Machine ×1 Power Charger ×1 16-Key Remote ×1 User Manual ×1 Use original granules/consumables only. Read the manual fully before first use. Quick Start With power off, add granules through the top fill port and close the cap (never load through the nozzle). Power on and heat. When the display shows READY, trigger via DMX/remote. After the show, run purge/clean. Power off, allow to cool, then transport/store. Chat on WhatsApp for price & availability

Read more less

ACS 4-Channel Indoor Cold Fountain Console with Wireless Remote 4-Channel Fan Effect · 100m+ Wireless Control · Synchronized Spark Shows Create beautiful, choreographed firework shows with push-button simplicity. The ACS 4-Channel Firing Console is specially designed for indoor cold spark fountains, allowing you to create stunning "fan" or "flower" effects for weddings, parties, and stage events. This all-in-one unit holds four fountains and is completely battery-powered. The powerful long-range remote lets you fire fountains one by one for a sequential chase effect, or all at once for a grand finale, instantly creating a magical and joyful atmosphere. Key Benefits Create Dynamic Fan Effects: Fire 4 fountains sequentially to create a beautiful chase or "fan" effect, or trigger all at once for a high-impact moment. Enjoy Total Wireless Freedom: The entire console is battery-powered, allowing you to place it anywhere on stage or in a venue without worrying about power cords. Control from Over 100 Meters Away: The powerful 433MHz remote provides reliable, long-distance control, ensuring perfect timing for your effects. Benefit from Push-Button Simplicity: No complex programming needed. Just load the fountains, place the unit, and use the intuitive remote to create your show. Invest in a Durable Build: The rugged all-iron construction ensures the machine can withstand the demands of event production. Synchronize Multiple Consoles: Use one remote to control several 4-channel consoles for a massive, fully choreographed special effect. Simple Operation Insert 4 standard AA batteries (not included) into the console base. Carefully load up to 4 cold spark fountain refills (sold separately) into the designated holders. Place the console on a stable, flat surface in your desired location. Step back to a safe distance and use the wireless remote to trigger your stunning spark effect. Professional Show Control, Made Easy. This all-in-one firing system empowers you to design and execute beautiful firework displays with push-button simplicity, adding immense production value to any event. Technical Specifications Control Mode Wireless Remote Control (433MHz) Remote Distance Over 100 meters Receiver Power 4x AA Batteries (not included) Channels 4 Effect Fan Shape (Sequential or Simultaneous Firing) Material Durable Iron Dimensions 29 x 12 x 16 cm Weight 1.1 kg Important Notice: Consumables Sold Separately. This machine requires AA batteries and cold spark fountain refills to operate. Click here to purchase the compatible Safety Cold Spark Inserts. Need a bulk order for a large event or have a question about refills?Our team is ready to help you plan an unforgettable show. Message us on WhatsApp Frequently Asked Questions Are the cold spark fountains (refills) included? No. Due to shipping regulations, the pyrotechnic fountain refills are not included. You can purchase the compatible refills directly from us by following the link in the "Important Notice" section above. Is this device safe for indoor use? Yes, this system is specifically designed for "cold flame" fireworks, which are safe for indoor use as they produce a low-temperature spark. However, you must always ensure there is adequate ventilation and maintain a safe clearance from any flammable materials. What kind of batteries does the machine use? This 4-channel console requires 4 standard AA batteries (#5 batteries) to operate. These are not included and must be purchased separately. Can I fire the fountains one by one? Yes. The remote control system allows for both simultaneous firing (all at once) and sequential firing, where you can trigger them one after another to create a programmed, chase-like effect.

Read more less

ACS 6 Channel Indoor Spinning Cold Fountain Console with Remote 6-Channel Rotating Lotus Effect · 300m Wireless Control · Battery-Powered Create a stunning centerpiece for any event with the ACS Spinning Cold Fountain Console. This innovative system is designed to create a beautiful "blooming lotus flower" effect by rotating and firing six cold spark fountains. Completely battery-powered and controlled by an incredibly long-range remote, it offers total freedom of placement with no wires. Perfect for weddings, grand entrances, and stage finales, you can fire fountains sequentially for a chase effect or all at once for a spectacular climax, instantly creating a magical and joyful atmosphere. Key Benefits Create a Blooming Lotus Effect: The spinning base fires 6 fountains to produce a spectacular, rotating pyrotechnic centerpiece. Enjoy Total Wireless Freedom: The entire console is battery-powered, allowing you to place it anywhere on stage or in a venue without messy cords. Control from up to 300 Meters Away: The powerful long-range remote provides reliable, professional-grade control for perfect timing from any vantage point. Achieve Synchronized or Sequential Firing: Use the remote to fire all 6 fountains at once for a grand finale or trigger them one by one for a beautiful chase effect. Benefit from Safe Cold Flame Technology: Designed for indoor use with cold spark fountains, ensuring a low-temperature, low-smoke effect that is safer for venues and guests. Get a Complete, Easy-to-Use System: No complex programming. Just load batteries and fountains, place the unit, and control your show with the simple remote. Simple Operation Install 8 standard AA batteries and one 9V battery (not included) into the console and remote. Carefully load up to 6 cold spark fountain refills (sold separately) into the designated holders. Place the console on a stable, flat surface with adequate clearance for rotation. Step back to a safe distance and use the wireless remote to control rotation and firing. The Ultimate Centerpiece Effect. The dynamic motion and brilliant sparks of the rotating console create a high-impact visual that is guaranteed to be the highlight of any performance or celebration. Technical Specifications Control Mode Wireless Remote Control Remote Distance Up to 300 meters Receiver Power 8x AA Batteries (not included) Remote Power 1x 9V Battery (not included) Channels 6 Effect Rotating "Lotus" / "Fan" Effect Dimensions 23 x 23 x 25 cm Important Notice: Consumables Sold Separately. This machine requires batteries and cold spark fountain refills to operate. Click here to purchase the compatible Safety Cold Spark Inserts. Need a bulk order for a large event or have a question about refills?Our team is ready to help you plan an unforgettable show. Message us on WhatsApp Frequently Asked Questions Are the cold spark fountains (refills) included? No. Due to shipping regulations, the pyrotechnic fountain refills are not included. You can purchase the compatible refills directly from us by following the link in the "Important Notice" section above. Is this device safe for indoor use? Yes, this system is specifically designed for "cold flame" fireworks, which are safe for indoor use as they produce a low-temperature spark. However, you must always ensure there is adequate ventilation and maintain a safe clearance from any flammable materials. What kind of batteries do I need? The main spinning console requires 8 standard AA batteries, and the remote control requires one 9V battery. These are not included and must be purchased separately. Can I fire the fountains one by one? Yes. The remote control system allows for both simultaneous firing (all at once) and sequential firing, where you can trigger them one after another to create a programmed, chase-like effect.

Read more less

ACS 10 PCS Hanging Cold Sparkler Waterfall Triggering Kit with Remote 10-Receiver Wireless System · Stunning Waterfall Effect · Remote Controlled Create a breathtaking sparkler waterfall with the ACS Hanging Triggering Kit. This all-in-one system is the easiest way to produce a professional, synchronized downward-spraying cold spark show for weddings, stage backdrops, and grand entrances. Each of the 10 receivers is equipped with a sturdy hook for easy mounting on trusses, pipes, or steel wires. The entire system is battery-powered and controlled by a long-range remote, allowing you to instantly create a joyful and magical atmosphere with the push of a button. Key Benefits Create a Spectacular Waterfall Effect: Trigger all 10 units at once to produce a massive, cascading wall of safe cold sparks. Enjoy Total Wireless Freedom: Each receiver is battery-powered, allowing you to hang them anywhere without worrying about messy power cords. Hang and Activate with Ease: The integrated hooks make it simple to mount the receivers on any overhead truss, crossbar, or steel wire for a perfect downward effect. Get an All-in-One Professional Kit: Includes 10 hanging receivers and a wireless remote, all packed in a convenient carrying case for easy transport. Control from a Distance: The powerful remote provides reliable, long-distance control for perfect timing from a safe distance. Elevate Any Event: Perfect for creating a magical backdrop for weddings, a dramatic reveal on stage, or a high-energy moment at parties. Simple Operation Install 2 AA batteries (not included) into each of the 10 receiver bases. Carefully place one cold spark fountain refill (sold separately) into the hole of each receiver. Securely hang the receivers from your truss, pipe, or steel wire using the built-in hooks. Step back to a safe distance and use the wireless remote to trigger your stunning sparkler waterfall. Professional Show Control, Made Easy. This complete triggering system empowers you to design and execute beautiful spark displays with push-button simplicity, adding immense production value to any event. Technical Specifications Kit Includes 10x Hanging Receivers, 1x Remote Control, 1x Carrying Case Control Mode Wireless Remote Control Effect Downward Sparkler Waterfall Receiver Power 2x AA Batteries per unit (not included) Refill Compatibility Cold Spark Fountain Refills Case Dimensions 29 x 17.5 x 19 cm Important Notice: Consumables Sold Separately. This kit requires AA batteries and cold spark fountain refills to operate. Click here to purchase the compatible Safety Cold Spark Inserts. Need a bulk order for a large event or have a question about refills?Our team is ready to help you plan an unforgettable show. Message us on WhatsApp Frequently Asked Questions Are the spark fountains (refills) included? No. Due to shipping regulations, the spark fountain refills are not included. You can purchase the compatible refills directly from us by following the link in the "Important Notice" section above. Is this system safe for indoor use? Yes, this triggering system is specifically designed for "cold spark" fountains, which are safe for indoor use as they produce a low-temperature spark. However, you must always ensure there is adequate ventilation and maintain a safe clearance from any flammable materials below. How many batteries do I need? Each of the 10 receiver bases requires 2 AA batteries, for a total of 20 AA batteries for the whole kit. The remote will also require its own small battery. Batteries are not included.

Read more less

ACS 3 Channel Hand-Held Indoor Cold Sparkler 3-Fountain Fan Effect · Battery-Powered · Push-Button Operation Unleash a dazzling fan of sparks right from your fingertips! The ACS 3-Channel Handheld Sparkler is the perfect tool for creating impressive, high-energy moments. Its ergonomic design allows you to safely trigger three cold spark fountains at once with the simple push of a button. Because it uses safe cold spark technology, it's perfect for creating a beautiful 'flower' effect at weddings, electrifying nightclub parties, and adding a professional touch to stage performances, all without smoke, heat, or fire risks. Key Benefits Create a Dazzling Fan Effect: Simultaneously trigger three cold spark fountains for a beautiful "flower" of sparks that guarantees to wow the crowd. Enjoy Total Wireless Freedom: The entire unit is battery-powered, allowing you to move and activate the effect anywhere, anytime. Benefit from Instant Operation: A simple push-button control means your spectacular 3-spark burst is always ready at your fingertips. No remote needed. Elevate Any Grand Event: This one versatile tool is perfect for weddings, stage shows, nightclubs, concerts, and any celebration needing a high-impact moment. Simple Push-Button Operation Install AA batteries (not included) into the handle compartment. Carefully insert up to three cold spark fountain refills (sold separately) into the barrels. Hold the launcher firmly and aim in a safe, upward direction, away from people and flammable objects. Press and hold the button to activate the stunning 3-fountain burst of sparks. Put the Power of a Sparkling Fan in Your Hands. The 3-channel launcher allows for dynamic, interactive effects. Create a beautiful 'flower' of sparks for a grand entrance, energize the dance floor, or light up a concert crowd—the possibilities are endless! Technical Specifications Control Mode Manual Push-Button Control Power Source AA Batteries (not included) Channels 3 Required Refills Cold Spark Fountain Refills (not included) Material Durable Iron Dimensions 20 x 16 x 12 cm Weight 0.9 kg Important Notice: Consumables Sold Separately. This product is a handheld spark effect controller. The required AA batteries and cold spark fountain refills are not included. Click here to purchase the compatible Safety Cold Spark Inserts. Need a bulk order for a large event or have a question about refills?Our team is ready to help you plan an unforgettable show. Message us on WhatsApp Frequently Asked Questions Are the sparks hot or dangerous? This device uses "cold spark" fountain refills, which produce a low-temperature effect that is safe to be near and poses no fire risk. It's designed for close-proximity use at events. What kind of refills and batteries do I need? You will need standard "cold spark fountain" refills and AA batteries (the exact number may vary, please check the battery compartment). Please note that neither of these are included. You can purchase compatible refills from us via the link in the "Important Notice" section above. Is it difficult to use? Not at all. It is one of the simplest special effects devices available. Simply install the batteries and fountain refills, and press the button to operate.

Read more less

ACS 3 Channel Handheld Spinning Indoor Fountain Firing Shooter Spinning Windmill Effect · 3-Fountain Burst · Push-Button Operation Unleash a mesmerizing spinning windmill of sparks right from your fingertips! The ACS 3-Channel Handheld Spinning Shooter is the ultimate tool for creating unforgettable, high-energy moments. Its unique design triggers three cold spark fountains while spinning, creating a dynamic visual effect. Because it uses safe cold spark technology, it's perfect for electrifying nightclub parties, adding a professional touch to stage performances, and making wedding send-offs truly spectacular, all without smoke, heat, or fire risks. Key Benefits Create a Dazzling Windmill Effect: Simultaneously triggers and spins three cold spark fountains for a spectacular "pinwheel" of sparks. Enjoy Total Wireless Freedom: The entire unit is battery-powered, allowing you to move and activate the effect anywhere, anytime. Benefit from Instant Operation: A simple push-button control means your spectacular spinning spark burst is always ready at your fingertips. Elevate Any Grand Event: This one versatile tool is perfect for weddings, stage shows, nightclubs, concerts, and any celebration needing a high-impact moment. Simple Push-Button Operation Install AA batteries (not included) into the handle compartment. Carefully insert up to three cold spark fountain refills (sold separately) into the barrels. Hold the shooter firmly and aim in a safe, upward direction, away from people and flammable objects. Press and hold the button to activate the stunning spinning fountain of sparks. Put a Spinning Spark Display in Your Hands. The spinning shooter allows for dynamic, interactive effects. Create a dazzling sparkling send-off for the bride and groom, energize the dance floor, or light up a concert crowd—the possibilities are endless! Technical Specifications Control Mode Manual Handheld Control Power Source AA Batteries (not included) Channels 3 Effect Spinning "Windmill" Spark Fountain Required Refills Cold Spark Fountain Refills (not included) Material Durable Iron Dimensions 29 x 25 x 22 cm Important Notice: Consumables Sold Separately. This product is a handheld spark effect controller. The required AA batteries and cold spark fountain refills are not included. Click here to purchase the compatible Safety Cold Spark Inserts. Need a bulk order for a large event or have a question about refills?Our team is ready to help you plan an unforgettable show. Message us on WhatsApp Frequently Asked Questions Are the sparks hot or dangerous? This device uses "cold spark" fountain refills, which produce a low-temperature effect that is safe to be near and poses no fire risk. It's designed for close-proximity use at events. What kind of refills and batteries do I need? You will need standard "cold spark fountain" refills and AA batteries. Please note that neither of these are included. You can purchase compatible refills from us via the link in the "Important Notice" section above. How is this different from the other handheld shooters? The key difference is the spinning motion. While other models trigger sparks straight forward, this model rotates the three fountains as they activate, creating a dynamic and exciting "windmill" or "pinwheel" effect.

Read more less

ACS Double Wheel Cold Fountain Rotating Machine Dynamic Spinning Spark Effect · 100m+ Wireless Remote · For Weddings & Events Ignite the excitement and create a show-stopping moment with the ACS Double Wheel Rotating Machine. This powerful stage effect device transforms standard cold spark fountains into a dazzling, spinning wheel of light. Completely battery-powered and controlled by a long-range wireless remote, it offers ultimate creative freedom for weddings, concerts, parties, and DJ sets. Built from durable iron, it's the perfect way to add a high-energy, professional spark display to any event. Key Benefits Create a Dynamic Spinning Spark Show: The dual-wheel design spins cold fountains for a stunning, vortex-like visual effect that captivates audiences. Enjoy Total Wireless Freedom: The battery-powered design eliminates messy cables, allowing you to place the machine anywhere for the perfect shot. Control from a Distance: A powerful remote provides reliable, long-range control from over 100 meters (328 ft) away for perfect timing. Full Command of the Effect: The remote lets you control forward and reverse rotation, trigger different sets of fountains, and stop the effect instantly. Durable, Stage-Ready Construction: Made from solid iron, this machine is built to handle the demands of repeated use in professional event settings. Elevate Any Event: Perfect for creating a grand entrance, a concert finale, a high-energy dance floor moment, or a wedding send-off. Simple Setup for a Spectacular Show Install 8 AA batteries (not included) into the receiver's power compartment. Securely place one cold spark fountain refill (sold separately) into each of the desired nozzles on the machine. Position the machine on a stable, flat surface in your desired location for the show. From a safe distance, use the wireless remote to control rotation direction and activate the fountains for an incredible spinning display. The Ultimate Centerpiece Effect. This machine is designed to be the main attraction, producing a high-impact, memorable visual that will leave your guests speechless. Technical Specifications Product Name ACS Double Wheel Rotating Cold Fountain Machine Control Mode Wireless Remote Control Frequency 433MHz Remote Distance Over 100 meters (328 ft) Receiver Power 8x AA Batteries (not included) Effect Rotating Double Wheel Spark Fountain Material Iron Dimensions (L x H x W) 58 cm x 32 cm x 18 cm Weight 5.5 kg (12.1 lbs) Important Notice: Consumables Sold Separately. This machine requires AA batteries and cold spark fountain refills to operate. Click here to purchase the compatible Safety Cold Spark Inserts. Questions about effects or need help with a large order?Our special effects team is here to help you design an unforgettable show. Message us on WhatsApp Frequently Asked Questions Are the cold spark fountain refills included? No. Due to shipping regulations, the spark fountain refills are not included. You can purchase compatible refills by following the link in the "Important Notice" section above. Is this device safe for indoor use? Yes, cold spark fountains are designed to be safe for indoor use. However, you must always ensure there is adequate ventilation and maintain a safe clearance from any flammable materials, curtains, or people due to the spinning motion. How many batteries does it require? The machine requires 8 standard AA batteries to operate its receiver and motors. Batteries are not included. Can I control the rotation direction? Yes. The remote control allows you to select forward rotation, reverse rotation, or stop the rotation completely, giving you full creative control over the visual effect.

Read more less

ACS 10 PCS Cold Spark Fountain Firing Kit with Remote 10-Receiver Wireless System · 70m+ Remote Range · Create Synchronized Spark Displays Create breathtaking, dreamlike scenes at your next event with the ACS Cold Spark Firing Kit. This all-in-one system is the easiest way to produce a professional, synchronized cold spark display for weddings, parties, concerts, and celebrations. The kit includes 10 battery-powered receivers and 2 long-range remotes, all housed in a durable protective case. Simply place the receivers, insert your cold spark fountains, and press a button to instantly create a joyful and magical atmosphere. Your browser does not support the video tag. Key Benefits Create Synchronized Shows: Trigger all 10 units at once for a grand finale or fire them sequentially for a stunning, choreographed effect. Enjoy Total Wireless Freedom: Each receiver is battery-powered, allowing you to place them anywhere without worrying about messy power cords. Control from a Distance: The powerful remote provides reliable, long-distance control from over 70 meters (230 ft) away for perfect timing. Get an All-in-One Professional Kit: Includes 10 receivers, 2 remotes for backup/dual control, and a rugged protective flight case for easy transport and storage. Benefit from Simple Operation: Each receiver has its own stable base. Just load the fountain, place the unit, and press a button on the remote. Elevate Any Event: Perfect for creating a grand entrance at weddings, a high-energy moment at parties, or a professional finale for stage shows. Simple Operation Install 2 AA batteries (not included) into each of the 10 receiver bases. Carefully place one cold spark fountain refill (sold separately) into the hole of each receiver. Position the receivers at your desired locations for the show. Step back to a safe distance and use the wireless remote to trigger a stunning, synchronized spark display. Professional Show Control, Made Easy. This complete triggering system empowers you to design and execute beautiful spark displays with push-button simplicity, adding immense production value to any event. Technical Specifications Control Mode Wireless Remote Control Remote Distance Approx. 70 meters (230 ft) Receiver Power 2x AA Batteries per unit (not included) Refill Compatibility Cold spark fountains with diameter < 4.3cm Material Durable Plastic & Metal Important Notice: Consumables Sold Separately. This kit requires AA batteries and cold spark fountain refills to operate. Click here to purchase the compatible Safety Cold Spark Inserts. Need a bulk order for a large event or have a question about refills?Our team is ready to help you plan an unforgettable show. Message us on WhatsApp Frequently Asked Questions Are the spark fountains (refills) included? No. Due to shipping regulations, the fountain refills are not included. You can purchase the compatible refills directly from us by following the link in the "Important Notice" section above. Is this system safe for indoor use? Yes, this triggering system is specifically designed for "cold spark" fountains, which are safe for indoor use as they produce a low-temperature spark. However, you must always ensure there is adequate ventilation and maintain a safe clearance from any flammable materials. How many batteries do I need? Each of the 10 receiver bases requires 2 AA batteries, for a total of 20 AA batteries for the whole kit. The remotes will also require their own small batteries. Batteries are not included. Can I trigger the fountains one by one? Yes. The remote control system allows for both simultaneous triggering (all at once) and sequential triggering, where you can activate them one after another to create a programmed, chase-like effect.

Read more less

Cold Spark Fountain Handheld Shooter by ACS Mini Spark Device · Battery-Powered · Handheld Trigger Control Put the magic of dazzling, safe-to-touch sparks directly into your hands! The ACS Handheld Spark Shooter is a compact, battery-powered device that lets you create an enchanting visual spectacle at any event. Unlike traditional effects, this gun produces a low-temperature, smokeless spark fountain that is perfect for indoor use. Its cool, futuristic design and simple trigger operation make it an ideal prop for DJs, wedding parties, photo booths, and celebrations of all kinds. Key Benefits Safe & Eco-Friendly Sparks: Produces a low-temperature, smokeless, and odorless fountain, making it safe for indoor venues and crowds. Enjoy Total Portability: Lightweight, compact, and completely battery-powered for ultimate freedom of movement. No cords, no limits. Effortless Trigger Control: Incredibly easy to use—simply load a fountain, aim, and pull the handheld trigger for an instant spark effect. Durable & Stylish Design: Crafted from high-quality iron and ABS with a cool, futuristic shape that looks great on stage and in photos. Enhance Any Celebration: The perfect high-energy addition for DJs, weddings, birthdays, concerts, nightclubs, and any festive event. Create Unforgettable Moments: Captivate guests and create stunning photo and video opportunities with a magical shower of sparks. Point-and-Shoot Operation Insert the required AA batteries (not included) into the designated compartment. Carefully insert one cold spark fountain refill (sold separately) into the nozzle of the shooter. Aim the device in a safe, upward direction away from people and flammable objects, then simply pull the trigger to activate the effect. Be the Director of the Magic. This handheld shooter gives you the power to create your own spectacular moments, directing the energy and excitement exactly where you want it, when you want it. Technical Specifications Control Mode Handheld Trigger Power Supply AA Dry Batteries (not included) Consumables Cold Spark Fountains Material High-Quality Iron Metal & ABS Dimensions 29 cm x 34 cm x 10 cm Weight Approx. 1.1 kg (2.4 lbs) Important: Consumables Not Included. This device requires AA batteries and compatible fountain refills to operate, which are sold separately. Need a bulk order for your event team or have questions about refills?Our special effects team is ready to help you plan an unforgettable show. Message us on WhatsApp Frequently Asked Questions Are the fountain refills included? No. Due to shipping regulations, the spark fountain refills are not included. You can purchase compatible refills by following the link in the "Important Notice" section above. Is it actually safe to use indoors? Yes. The device uses "cold spark" fountains, which have a very low temperature and are smokeless, making them suitable for indoor use. However, always ensure you are aiming away from people's faces and any flammable materials like curtains or decorations. What kind of batteries does it need? This device is powered by standard AA dry batteries. The exact number required is specified in the product manual. Batteries are not included. Is it heavy to hold for a long time? No, it's designed to be portable. The device weighs only about 1.1 kg (2.4 lbs) without consumables, making it lightweight and easy to handle during an event.

Read more less

ACS 12 PCS Cold Spark Fountain Triggering Kit with remote 12-Receiver Wireless System · 70m+ Remote Range · Create Synchronized Spark Displays Create breathtaking, dreamlike scenes at your next event with the ACS Cold Spark Triggering Kit. This all-in-one system is the easiest way to produce a professional, synchronized cold spark display for weddings, parties, concerts, and celebrations. The kit includes 12 battery-powered receivers and 2 long-range remotes, all housed in a durable protective case. Simply place the receivers, insert your cold spark fountains, and press a button to instantly create a joyful and magical atmosphere. Your browser does not support the video tag. Key Benefits Create Synchronized Shows: Trigger all 12 units at once for a grand finale or activate them sequentially for a stunning, choreographed effect. Enjoy Total Wireless Freedom: Each receiver is battery-powered, allowing you to place them anywhere without worrying about messy power cords. Control from a Distance: The powerful remote provides reliable, long-distance control from over 70 meters (230 ft) away for perfect timing. Get an All-in-One Professional Kit: Includes 12 receivers, 2 remotes for backup/dual control, and a rugged protective flight case for easy transport and storage. Benefit from Simple Operation: Each receiver has its own stable base. Just load the fountain, place the unit, and press a button on the remote. Elevate Any Event: Perfect for creating a grand entrance at weddings, a high-energy moment at parties, or a professional finale for stage shows. Simple Operation Install 2 AA batteries (not included) into each of the 12 receiver bases. Carefully place one cold spark fountain refill (sold separately) into the hole of each receiver. Position the receivers at your desired locations for the show. Step back to a safe distance and use the wireless remote to trigger a stunning, synchronized spark display. Professional Show Control, Made Easy. This complete triggering system empowers you to design and execute beautiful spark displays with push-button simplicity, adding immense production value to any event. Technical Specifications Control Mode Wireless Remote Control Remote Distance Approx. 70 meters (230 ft) Receiver Power 2x AA Batteries per unit (not included) Refill Compatibility Cold spark fountains with diameter < 4.3cm Material Durable Plastic & Metal Important Notice: Consumables Sold Separately. This kit requires AA batteries and cold spark fountain refills to operate. Click here to purchase the compatible Safety Cold Spark Inserts. Need a bulk order for a large event or have a question about refills?Our team is ready to help you plan an unforgettable show. Message us on WhatsApp Frequently Asked Questions Are the spark fountains (refills) included? No. Due to shipping regulations, the fountain refills are not included. You can purchase the compatible refills directly from us by following the link in the "Important Notice" section above. Is this system safe for indoor use? Yes, this triggering system is specifically designed for "cold spark" fountains, which are safe for indoor use as they produce a low-temperature spark. However, you must always ensure there is adequate ventilation and maintain a safe clearance from any flammable materials. How many batteries do I need? Each of the 12 receiver bases requires 2 AA batteries, for a total of 24 AA batteries for the whole kit. The remotes will also require their own small batteries. Batteries are not included. Can I trigger the fountains one by one? Yes. The remote control system allows for both simultaneous triggering (all at once) and sequential triggering, where you can activate them one after another to create a programmed, chase-like effect.

Read more less

ACS 1200W RGB Cold Spark Machine RGB LED Chasing Lights · 5.5m Adjustable Height · DMX & Remote Control Elevate your event with a mesmerizing dual spectacle of light and sparks. The ACS 1200W RGB Cold Spark Machine is a revolutionary device that combines a powerful, adjustable cold spark fountain with dynamic, chasing RGB LED lights. Using advanced electromagnetic heating, it produces a dense shower of completely safe, touchable sparks up to 5.5 meters high, all while the integrated LEDs create stunning visual effects. With multiple safety protections and versatile DMX or remote control, it's the ultimate all-in-one solution for creating an unforgettable atmosphere at concerts, weddings, clubs, and parties. Key Benefits Enjoy a 2-in-1 Visual Spectacle: Combines a high-output cold spark fountain with dynamic, chasing RGB LED lights for a unique and captivating dual effect. Create Massive Spark Fountains: The powerful 1200W electromagnetic heater produces dense, brilliant sparks with an adjustable height from 2m to 5.5m (18 ft). Benefit From Unmatched Safety: The flameless sparks are touchable and non-scalding. The machine includes multiple protections: tilt, overheat, and overload. Choose Your Control Method: Seamlessly switch between the intuitive wireless remote for quick adjustments or use the 9-channel DMX512 for professional stage integration. Experience Smart & Easy Maintenance: The intelligent auto-cleaning function clears out residual powder, preventing clogs and ensuring your machine is always ready for the next show. Rely on a Professional Build: A durable aluminum alloy and steel housing, efficient cooling system, and embedded handles make it perfect for the demands of mobile and stage use. Easy 4-Step Operation Add titanium powder to the consumable filling port. Connect the power cord and turn on the main power switch. Press "HEAT ON" to start heating (approx. 4 mins). The 'HEAT' light will flash, then the 'READY' light will stay on. Use the remote control or DMX console to select your desired spark height and activate the stunning effects. The Ultimate Stage Centerpiece. This machine does more than just create sparks; it creates an atmosphere. The unique combination of a powerful spark fountain and synchronized LED lights provides a multi-layered visual experience that will captivate any audience. Technical Specifications Power 1200W Spray Height Adjustable, 2 to 5.5 meters (6.5 to 18 ft) Light Source 6x7 RGB LEDs with Chasing Effects Control Mode DMX512 (9-Channel) / Wireless Remote / Master-Slave Preheat Time Approx. 4 minutes Hopper Capacity 200g Consumable Consumption 35g/min Material Aluminum Alloy, Carbon Steel, Plastic Dimensions 27 x 23.5 x 24.8 cm Net Weight 4.75 kg (10.5 lbs) Need help with DMX programming or have questions about consumables?Our expert team is here to provide guidance and support for your events. Message us on WhatsApp Frequently Asked Questions Are the sparks safe to touch? Yes. This is a "cold spark" machine. The sparks it produces are touchable, non-scalding (under 40°C), and pose no fire hazard, making them safe for a wide range of indoor and outdoor events. Does this machine come with the titanium powder? No. Due to shipping regulations, the consumable titanium powder is not included with the machine. It must be purchased separately. Can I control the LED lights and the sparks separately? Yes. Using the DMX controller, you have separate channels to control the spark output (height, duration) and the RGB LED effects (color, pattern, speed), giving you complete creative control. What is the 'tilt protection' feature? This is an important safety feature. If the machine is accidentally knocked over or tilted past a certain angle (typically 45°) during operation, it will automatically shut down the spark output to prevent any potential hazards.

Read more less