ACS FC-01 2500W Foam Cannon for Pool Party Massive Foam Output · Multicolor Options · Perfect for Water Parks & Events The ACS FC-01 2500W Foam Cannon is built for ultimate pool parties, water parks, shopping mall activities, and kids’ events. With its powerful 2500W high-power pump, it delivers up to 30m³ of foam per minute, covering up to 150㎡ in seconds. Foam can spray up to 6–8 meters, forming a fun, safe, and colorful “foam sea” for everyone to enjoy! The foam cannon is easy to operate, safe, and reliable with adjustable spray angle. Available in vibrant red, green, or blue foam powders to level up any event atmosphere. Foam effects last about 20–30 minutes per fill. Note: Use a 1:20 ratio of foam oil and water for optimal results. Key Features ▼ ✅ 2500W High-Power Pump with 30m³/min Foam Volume ✅ Covers Approx. 150㎡ Area Instantly ✅ 6–8 Meter Spray Distance ✅ Multicolor Foam: Red, Green, Blue ✅ Adjustable Angle & Easy Operation ✅ Safe, Reliable & Quality Assured ✅ Perfect for Pool Parties, Water Parks, Kindergartens ✅ Foam Lasts About 20–30 Minutes Need bulk pricing or setup help? Message us on WhatsApp for fast support. Technical Specifications Voltage AC110V/220V, 60/50Hz Power 2500W Control Mode Power Control Spray Distance 6–8 meters Bubble Capacity 10–13 m³ Foam Volume 30 m³/min Fuel Consumption 20L/min Covering Area Approx. 150㎡ Weight N.W. 50kg / G.W. 86kg Packing Size 119 × 60 × 116 cm How To Use Place the machine in the correct position. Connect the proper power supply, press the switch on the left (RED light) to start the blower. Press the switch on the right (GREEN light) to start the oil pump. Enjoy a steady foam output from the machine outlet. Important Notice Mix foam oil and water at a 1:20 ratio. Always start the blower first, then the pump. When using for the first time, fill the pump pipe with tap water to ensure normal suction. Handle carefully to prevent damage; do not soak the machine in water. FAQs ▼ Q: What liquid does it use?A: It uses foam oil mixed with water. Q: Where can I buy the foam liquid?A: You can purchase from us, local shops, or online. Q: Is the machine waterproof?A: It is safe for normal cleaning, but do not soak in water. Q: How long does the foam last?A: Approximately 20–30 minutes per use. Q: What is the spray distance?A: 6–8 meters, depending on setup and environment. Q: Can I adjust the foam spray angle?A: Yes, the angle is adjustable for flexible coverage.

Read more less

ACS Flame Retardant Colored Confetti Bio-Degradable 5kg Package · Lightweight Float · Eco-Friendly for Confetti Machines Our flame-retardant colored confetti is crafted for safe, vibrant, and biodegradable performance in any professional event setting. With 5kg per pack and portable packaging, it's ready to elevate weddings, concerts, birthdays, and more. Designed to linger longer in the air, the lightweight paper creates stunning atmospheres while being eco-conscious. Ideal for stage effects, indoor and outdoor celebrations, and high-profile productions that require both performance and safety. Key Features ▼ ✅ Flame-Retardant Safety: Meets safety standards for stage and event use ✅ 5kg Packaged Bags: Easy to transport and refill ✅ Stays in the Air Longer: Lightweight structure for slow descent ✅ Eco-Friendly: Biodegradable and non-toxic materials ✅ Versatile Applications: Perfect for weddings, birthdays, concerts, and more Have questions about color choices or bulk pricing? Contact us on WhatsApp for fast support and expert advice on event planning and logistics. Packing List ✓ 1 x 5kg Bag of Flame Retardant Confetti Q&A Q: Can I use this confetti with any confetti cannon?A: Yes, it's compatible with most standard CO2 or electric confetti machines. Q: Is the confetti safe for indoor use?A: Absolutely. It's flame-retardant and biodegradable—perfect for indoor venues and stage use. Q: Will the confetti cause residue or clog the machine?A: No, the materials are clean-cut and designed to prevent clogging or residue buildup.

Read more less

ACS Flightcase for Moving Head Stage Lights Custom Fit · Road-Ready Protection · Built for Touring Professionals Protect your valuable moving head stage lights with our ACS Custom Flightcases — engineered for professionals who demand durability, precision, and safe transport. Whether you're touring across the country or managing local events, these cases are your best defense against bumps, drops, and the chaos of loading docks. Each case is custom built to the dimensions of your lighting fixtures, with protective EVA or foam interior lining, robust aluminum edge profiles, and heavy-duty butterfly latches. Whether you're storing 2, 4, or 8 units, we’ll design your case around your gear, not the other way around. Key Features ▼ ✅ Custom compartments for 2–8 moving head lights ✅ Full ATA-grade 3/8" plywood with hard PVC laminate ✅ Durable aluminum extrusions and steel ball corners ✅ Foam-lined interior for shock and vibration protection ✅ Heavy-duty butterfly latches and spring-loaded handles ✅ Optional caster wheels and removable tray dividers ✅ Ideal for Beam, Spot, Wash, Hybrid and other fixtures Need a custom size or special interior layout? Message us on WhatsApp for a free design consultation and quote. Technical Specifications (Typical Build) Material 3/8" Plywood with Black PVC Laminate Interior High-density EVA Foam / Custom Cut Compartments Hardware Butterfly Latches, Recessed Handles, Steel Corners Mobility Optional 4" Swivel Casters Use Case Moving Head Beam, Spot, Wash, Hybrid Fixtures Important Notice Because each case is made-to-order, please confirm your fixture model before ordering. We support most brands including Martin, Chauvet, Beam 230, Beam 260, and more.

Read more less

ACS FX-1 80W Single Head Flame Machine with Safe Channels DMX512 & Electric Control · 3-Meter Flame Height · 99% Ignition Rate Unleash the power of fire at your next event with the ACS FX-1 Single Head Flame Machine. This professional-grade unit is engineered for reliability and safety, featuring a high-quality valve and pulse igniter system that achieves an impressive 99% ignition success rate. Capable of shooting flames up to 3 meters high, it offers both DMX512 for precise show control and simple electric control for easy operation. A built-in safety channel prevents accidental firing, making it a dependable choice for concerts, stage shows, and high-energy performances. Key Features Dual Control Modes: Flexible operation with both DMX512 and standard electric control. Impressive Flame Height: Projects powerful bursts of flame up to 3 meters (approx. 10 feet). DMX Safety Channel: Prevents accidental firing, ensuring the machine only operates when intended. Stable Spray Design: The latest internal design ensures a consistent and stable flame effect. LCD Display: Clear and easy-to-use display for quick setup and DMX addressing. Tilt Protection: A dumping switch automatically cuts power if the machine is tilted over 45°. Need help with fuel, DMX, or wholesale pricing?Our tech team is ready to provide expert guidance and support. Message us on WhatsApp How To Use Open the flame machine door, place the flame liquid can on the holder, ensure it's secure, and close the door firmly. Connect the power supply and turn on the switch. Connect the machine to a DMX controller and set the DMX address. The machine will self-check, and the indicator will flicker. Activate the safety channel by setting DMX Channel 1 to a value between 100 and 155. The machine will now be armed. Use DMX Channel 2 to spray the flame. After use, turn off the machine, disconnect all cables, and wait 15 minutes for the ignition needle to cool before removing any remaining fuel and cleaning the unit. 99% Ignition Success Rate: Built with high-quality valves and a powerful pulse igniter, the FX-1 delivers a reliable and instant flame burst every single time—dependability you can count on for any live show. Technical Specifications Voltage AC 110V/220V, 50/60Hz Power 80W Control Method DMX 512 / Electronic Control DMX Channels 2 (CH1: Safety, CH2: Spray) Flame Height 3 meters (10 ft) Fire Fuel Standard Flame Oil / Kerosene-based fluid Certifications CE, RoHS, FCC Warranty 1 Year Net Weight 4.1 kg Package Size 26 x 26 x 35 cm Packing List 1x ACS FX-1 Flame Machine 1x Signal Cable (DMX) 1x Power Cord 1x User Manual Important Notices: Fuel and DMX controller are NOT included. Default packaging is a carton box; contact us if you require a flight case. Always read the manual carefully before use. Frequently Asked Questions Where can I buy fuel for this machine? You can use standard flame oil or starting fluid available in your country. Here are a few examples: USA: Valvoline Starting Fluid on Amazon Europe: Car Starting Fluid on Amazon.de France: Dragon Tower III Fuel What is the fuel's chemical composition? The main ingredient in recommended starting fluids is Diethyl Ether, often mixed with Petroleum Distillates, Propane, or Butane. Colored fluids contain organic dyes. How long does a bottle of fuel last? A standard 200ml fuel bottle will last for approximately 60-70 seconds of continuous spray. Will this machine cause a fire or set off a smoke alarm? While this is a real flame effect, it is designed for safe use. When used according to instructions and kept at a safe distance from flammable materials, it will not cause a fire. It produces minimal smoke. Always follow local fire safety regulations. What is the "dumping switch"? The dumping switch is a safety feature. If the machine is tilted more than 45 degrees, the power will be cut off automatically, and the flame projector will stop instantly, ensuring the security of the event. What should I do if the machine sprays oil but doesn't ignite? This usually means the ignition pin is misaligned with the spray nozzle. The spark is not meeting the fuel. Carefully adjust the angle of the ignition pin to align it with the nozzle and try again.

Read more less

ACS FX-10 350W 10M Flame Machine 350W Power · Up to 10M Spray Height · Waterproof · Dual Ignition The ACS FX-10 is a high-powered, direct-injection flame machine designed for both indoor and outdoor use. Built for visual impact and reliability, it produces towering flames reaching up to 10 meters using isopropanol or isoalkane-based fuels. With a rugged stainless steel body and IPX3 waterproof protection, it performs even under rain and extreme conditions. Featuring dual ignition, automatic tilt lock, and a safety mode switch, this unit provides unmatched safety and control. Ideal for festivals, concerts, outdoor celebrations, and permanent installations requiring maximum flame reach and consistency. Key Features ▼ ✅ Direct Fuel Injection: Liquid injection flame system with powerful visual output ✅ 8–10M Flame Height: Giant flame columns ideal for outdoor and stadium use ✅ Dual Ignition System: Improves ignition success and consistency ✅ IPX3 Waterproof: Operates safely even in light rain ✅ Tilt Protection: Auto nozzle lock when tilted ≥45° ✅ Safety Mode Lock: Switch between test and performance modes ✅ Stainless Steel Housing: Durable, rust-proof, and event-ready Looking for multi-unit deals or technical consultation? Message our engineer team on WhatsApp and get instant support. Technical Specifications Attribute Details Application Indoor / Outdoor Voltage AC 100–240V Power 350W Control Mode DMX512 Waterproof Rating IPX3 Fuel Type Isopropanol, Isoalkane G/H/L/M Fuel Capacity 5 Liters Consumption Rate 60ml / second Spray Direction Vertically upward Flame Height 8–10 meters Dimensions 36 × 35 × 35 cm Net Weight 15.3kg (without fuel) How To Use Fill fuel tank with approved liquid fuel up to 5L. Connect DMX cable and power cord. Set DMX address. Switch to test mode for trial or to working mode for live performance. Activate safety lock, then trigger flame using DMX channels. After use, turn off power, release pressure, and safely store unit. Packing List ✓ 1 x FX-10 Flame Machine ✓ 1 x Power Cable ✓ 1 x User Manual ✓ 1 x DMX Cable Important Notice Flame oil not included due to shipping restrictions. Always test in open and ventilated space with safety protocols in place. Q&A Q: Can this flame machine be used in the rain?A: Yes, it is IPX3-rated for light rain. Still, avoid heavy storms for safety. Q: What fuel can I use?A: Use Isopropanol or Isoalkane G/H/L/M. Do not use gasoline or unknown liquids. Q: Can I install it upside down or sideways?A: No, spray direction must be vertical for safety and performance. Q: How long does one full tank last?A: Around 80–90 seconds of continuous spray (5L at 60ml/sec). Q: What is the ignition success rate?A: The dual ignition system provides high stability, close to 100% success under standard operation.

Read more less

ACS FX-1L 80W LPG Single Head Flame Machine with Safe Channels High-Quality LPG Valve · DMX512 & Electric Control · Up to 3M Flame Height The ACS FX-1L is a professional single-head flame machine designed for reliability and safety. It operates on Liquefied Petroleum Gas (LPG) and features both DMX512 and simple electric control for versatile operation. With its updated high-quality valve and igniter, it boasts a 99% ignition success rate, producing stable and impressive flame effects up to 3 meters high. Built-in safety features, including a dedicated DMX safety channel and a tilt sensor, prevent accidental firing and ensure safe use in any stage production or event. Key Features ▼ ✅ High-quality valve and igniter for reliable performance. ✅ Built-in tilt sensor for instantaneous power cut-off if the machine is dropped or tilted. ✅ Simple operation with both DMX512 and direct electric control modes. ✅ Features a dedicated DMX safety channel to prevent accidental firing. ✅ Designed exclusively for use with Liquefied Petroleum Gas (LPG). Have questions about using LPG fuel or DMX setups? Chat with our experts on WhatsApp for support. How To Use Securely connect the LPG (liquefied petroleum gas) tank to the flame machine using the provided gas pipe. Connect the power supply and turn on the switch. Connect the machine to a DMX controller using the DMX cable and set the DMX address. The machine will perform a self-check, and the indicator lamp will flicker. Once a valid DMX signal is detected, the display will light up. The machine has a safety channel. It will only operate when DMX Channel 1 is set to a value between 100–155. Use the subsequent channels to trigger the flame. After use, turn off the power and disconnect the power, signal, and gas lines. Wait 15 minutes for the ignition needle to cool completely, then remove any remaining fuel and wipe the machine clean. 🔥 99% Ignition Success Rate: Featuring an upgraded valve and high-efficiency igniter, the FX-1L delivers a reliable and immediate flame effect every single time. Perfect for moments that can't be missed! Technical Specifications Voltage AC 110/230V, 50/60Hz Power 80W Flame Height 1–3 meters Control Mode DMX512 / Electric Control DMX Channels 2 Fuel Type Liquefied Petroleum Gas (LPG) Ignition High-Quality Pulse Igniter Net Weight 4.1 kg Gross Weight 5 kg Certificates CE, RoHS, FCC Warranty 1 Year Packing List Item Qty ACS FX-1L Flame Machine 1 pc Power Cord 1 pc DMX Cable 1 pc Gas Pipe 1 pc Hose Clamp 2 pcs Quick Connector 1 pc User Manual 1 pc Important Notice Before using this product, please read the operating guide carefully. Performance may be affected by strong wind. Please Note: All machines are sold without a DMX controller. If you need one, you can purchase one here. FAQs ▼ Q: If I use this flamethrower, will it cause a fire or set off a smoke alarm?A: Our flame machine can be used indoors or outdoors. As long as it is kept at a safe distance from flammable materials, it will not cause a fire or trigger a smoke alarm. The machine is equipped with a safety tilt switch; when tilted more than 45 degrees, it will immediately stop working. Q: What is the dumping switch?A: The dumping switch (or tilt sensor) is a safety feature. When the machine tilts over 45°, the power will be cut off automatically and the flame projector will stop instantly, ensuring the security of the event. Q: What is the safe channel?A: When you use a DMX controller, Channel 1 is a dedicated safety channel. A value of 102–153 must be sent on this channel to "open" the machine, allowing it to work. This prevents accidental flame bursts. Q: What are the control modes?A: DMX Control and Electric Control. DMX control means connecting a DMX cable to a controller for precise command. Electric control means the machine works when powered on and stops when powered off. Q: What should I do if the machine sprays fuel but doesn't catch fire?A: The angle of the ignition pin may be misaligned with the nozzle. Please carefully adjust the angle of the ignition pin to align with the nozzle and try again. Ensure the machine is off and cool before adjusting. Q: What should I do if the machine keeps firing continuously?A: First, confirm all procedures are being followed correctly. Cut the power and operate it again. If it fails, the cause may be a broken valve. Please cut off the power and gas, and contact us to replace the valve. Q: What should I do if the product is broken during the warranty period?A: Don't worry, ACS has a professional team to help you solve all problems with our products in time. Please send us pictures or videos of the problem. We will guide you on how to fix it and provide spare parts for free if needed.

Read more less

ACS FX-2 120W Double-Head Flame Powerful Machine DMX Control · 3M Spray Height · Safe Channel System The ACS FX-2 is a compact and powerful flame machine using DMX512 control and electric ignition. It’s designed for stage performances, outdoor festivals, and grand openings, with a spray height of up to 3 meters and a high ignition success rate. Featuring a safety channel, pulse igniter, and user-friendly LCD interface, this unit offers safe and reliable operation. Lightweight yet effective, the FX-2 fits into any professional setup requiring controlled flame effects. Key Features ▼ ✅ DMX512 Control: Supports standard DMX input and safety control protocol ✅ High Spray Height: Shoots flame up to 3 meters for maximum visual effect ✅ Pulse Igniter: Fast ignition with success rate of up to 99% ✅ Compact Design: Easy to operate with LCD interface and addressable settings ✅ Safe Operation: Includes safety channel and automatic shutoff at >45° tilt Looking for a better price or technical advice? Message us on WhatsApp for an exclusive quote and full support from our in-house engineering team. We're happy to help—no matter the order size. Technical Specifications Attribute Details Voltage AC110/220V 50-60Hz Flame Height 3 meters Control Mode DMX512 + Electric DMX Channels 2 (Safety + Spray) Power 120W Net Weight 6kg Gross Weight 7kg Package Size 29x29x39cm Color Fire red (depends on flame oil) Warranty 1 year Certification CE, RoHS, FCC How To Use Place 2 flame oil cans into the machine and close the lid securely. Connect power and DMX cable. Set the address via LCD and power on. Ensure Channel 1 (safety) is open, then use Channel 2 to spray. Turn off power and unplug cables after use. Wait 15 mins before removing oil and cleaning the unit. Packing List ✓ 1 x FX-2 Flame Machine ✓ 1 x Power Cord ✓ 1 x DMX Cable ✓ 1 x User Manual Important Notice Shipping does not include flame oil due to safety regulations. Please source fuel locally in your country. Q&A Q: Where can I buy flame oil?A: We recommend checking Amazon (Valvoline Starting Fluid) or local effect supply stores.  Q: Can I use the FX-2 indoors?A: Yes, with proper ventilation and enough ceiling clearance. Always follow safety guidelines. Q: How high can the FX-2 spray flame?A: 3 meters using standard flame fluid. Q: Do I need DMX to operate it?A: Yes, this model requires a DMX controller. Please purchase separately if you don’t have one. Q: Is it safe for beginner operators?A: Yes. The machine includes a safety channel, tilt cutoff, and detailed instructions to ensure safe usage. Q: What if the ignition fails?A: Ensure fuel is aligned and the ignition pin isn’t bent. Check valve and connections. See manual troubleshooting guide. Q: How long does 1 bottle last?A: Around 60–70 seconds of spray (200ml). Q: Can I use third-party flame oil?A: Yes, but ensure compatibility (diethyl ether-based preferred).

Read more less

Be Cool Event FX-3 Triple Head Flame Machine 3-Channel Atomic Fire Effect | 3M Flame Height | DMX-512 Control Core Features ▼ ✅ Triple Safety System: Fall shut-off + safety channel + thermal cutoff ✅ Dual DMX Support: 3-pin & 5-pin XLR connectivity ✅ Precision Control: LCD display with address code verification ✅ Military Spec: Aircraft-grade aluminum combustion chambers Parameter Specifications Power System 180W ±3% Variance Flame Reach 1-3m (3.3-9.8ft) Adjustable Control Protocol 6-Channel DMX512 Dimensions 28.5×22×33cm (11.2×8.7×13") Net Weight 7.5kg (16.5lbs) Voltage AC 110-220V Auto-Sensing Professional Configuration ✓ Triple-Head Main Unit✓ DMX Control Cable (3-pin & 5-pin)✓ Safety Interlock Key✓ Flame Height Adjustment Tool✓ Multi-Language Operation Manual Operational Excellence ➤ 99% Ignition Success Rate ➤ 0.8 Second Response Time ➤ -10°C to 50°C Operational Range Safety First Protocol 1. Always engage safety channel before fuel connection2. Minimum 5m clearance from combustible materials3. Automatic shutdown if tilt exceeds 15°

Read more less

ACS FX-4 180W Quad-Head Flame Powerful Machine Four Independent Nozzles · 180W High Heat · DMX512 & Manual Control The ACS FX-4 is a professional-grade flame projector designed for concerts, outdoor events, and stage shows. Featuring four powerful flame heads controlled independently, it supports DMX512, manual button, and wireless remote modes. With a total of 180W heating power and built-in fans, this unit produces up to 3–5 meters of safe vertical flame bursts using standard flame oil. Its metal housing ensures durability, while the compact design is ideal for mobile DJs and touring teams. Key Features ▼ ✅ Quad-head flame design with 4 individually controlled nozzles ✅ Max flame height 3–5 meters (depends on oil and conditions) ✅ DMX512 control, wireless remote, and manual button modes ✅ Built-in ignition and fan system for quick start and safety ✅ Durable steel housing and portable handle Have questions about flame fuel or show safety? Chat with us on WhatsApp anytime. How To Use Open the door of the flame machine. Place 4 bottles of flame liquid securely into the holders, and close the door firmly. Connect the power supply and switch on the unit. Use the DMX signal cable to connect the machine to a DMX controller. Set the DMX address. The machine will perform a DMX self-check, and the indicator light will flicker. Once a valid DMX signal is detected, the display will light up. Ensure safety channel activation. The machine only operates when Channel 1’s value is between 100–155. Channels 2–7 are used to trigger each flame nozzle individually. After use, turn off the power and disconnect the power and signal cables. Wait 15 minutes for the ignition needle to cool. Then remove remaining flame oil and wipe the machine clean. 🔥 99% Ignition Success Rate: Thanks to our upgraded spark system and fan-assisted combustion, the FX-4 ensures nearly instant flame bursts every time — reliable for any live show! Technical Specifications Voltage AC220V, 50Hz Total Power 180W Flame Heads 4 Independent Outputs Flame Height 3–5 meters Control DMX512 / Manual Button / Wireless Remote Fuel Type Standard flame oil / alcohol-based oil Ignition Electric Spark with Fan Assist Material Steel Weight 8.5kg Packing List Item Qty FX-4 Flame Machine 1 pc Power Cable 1 pc Wireless Remote 1 pc User Manual 1 pc Important Notice Use only certified flame oil. Always follow safety protocols. Outdoor use recommended or ensure proper ventilation when used indoors. Keep away from flammable materials.

Read more less

ACS FX-5 Five Head DMX Flame Machine DMX 512 · 3.2M Flame Height · 8 Channels · Safety Channel The ACS FX-5 is a professional-grade flame machine featuring five independent flame heads, each controllable via DMX. Designed for stage productions, concerts, and outdoor events, it reaches a flame height of up to 3.2 meters with precise programmable sequences. Equipped with an updated valve system, 5-pin DMX port, and a safety tilt shutoff, the FX-5 ensures high performance and peace of mind. With a 99% ignition success rate, this is a reliable tool for any serious event planner or production crew. Key Features ▼ ✅ 8 DMX Channels: Full control of each flame head + sequence effects ✅ 3.2M Flame Height: High-impact visuals for large-scale events ✅ Safety Channel: Prevents accidental firing during setup ✅ Dumping Device: Auto shutdown when tilted ✅ 5-Pin DMX: Professional-grade signal input with no delay Need help with setup or bulk pricing? Chat with us on WhatsApp and our technical team will assist you within minutes. Technical Specifications Attribute Details Voltage AC 100–120V / 200–240V 50-60Hz Power 210W Flame Height Up to 3.2 meters Control Mode DMX 512 DMX Channels 8 Channels Net Weight 16.77kg Gross Weight 18.66kg Product Size 53×31×43cm Color Red (depends on flame oil) Warranty 1 year Certification CE, RoHS, FCC Shipping Most of our products are in stock and will be processed within 1–5 business days. By default, we ship from China via DHL, FedEx, or UPS. Delivery time is usually 7–15 business days, depending on your location. A tracking number will be provided once your order is shipped. If you're looking for a better shipping rate, feel free to contact us via WhatsApp to switch to sea freight. How To Use Install 5 bottles of flame oil into the holders and close the chamber door securely. Connect DMX and power cables. Power on and wait for DMX signal detection. Use DMX Channel 1 (value 100–150) to activate the safety channel. Use Channels 2–6 for individual flames, Channel 7 for all together, and Channel 8 for pattern sequences. Power off after use, disconnect cables, and wait 15 mins before removing oil. Packing List ✓ 1 x FX-5 Flame Machine ✓ 1 x Power Cord ✓ 1 x DMX Cable ✓ 1 x User Manual Important Notice This product does not include DMX controller or flame oil. Please purchase separately. Q&A Q: Do I need DMX to operate this unit?A: Yes. DMX controller is required for all functions. Q: How many heads spray simultaneously?A: You can control each of the 5 heads individually, or all together. Q: What’s the spray height range?A: Approximately 1–3.2 meters, depending on the flame fluid used. Q: Can I customize flame color?A: Yes, use colored flame oils for different effects. Q: Is it safe for indoor events?A: Only in large venues with proper ventilation and clearance. Always follow local fire safety rules.

Read more less

Be Cool Event FX-X5 DMX CO2 Jet Cannon DMX512-Controlled CO2 Burst System with 8-10M Jet Height & Dual Voltage The ultimate crowd-energizer for DJs and performers, this ultra-responsive CO2 jet system delivers instantaneous frost bursts with 8-10 meter vertical reach. Features dual control modes and universal voltage for global stage applications. IP20 rated with military-grade aluminum construction. Core Features ▼ ✅ Dual Control: DMX512 (1CH) + Manual Trigger ✅ Pressure Versatility: Compatible with High/Low Pressure CO2 Systems ✅ Rapid Deployment: 6m Gas Hose + Quick-Connect Fittings ✅ Portable Design: 4.8kg Aircraft Aluminum Body Technical Specifications Parameter Details Power Consumption 30W Voltage AC110V/220V Auto-Switching Jet Height 8-10 Meters Control Protocol DMX512 (Channel 1: 0-255 Spray Control) Hose Length 6m Industrial-Grade Gas Hose Package & Support ✓ Complete CO2 Jet System (Unit + Accessories)✓ Optional Flight Case Packaging (+$89)✓ Global Safety Certifications Included✓ 24/7 Technical Support✓ Bulk Order Discounts Available

Read more less

Be Cool Event FX-X7 DMX Double Nozzle CO2 Jet Cannon Dual-Control Stage Fog System | 6MPa Pressure | 6M Vertical Reach Core Features ▼ ✅ Dual Spray Channels: 5-6m instant fog columns (16.4-19.7ft) ✅ Industrial Construction: Powder-coated iron housing ✅ Smart Control: DMX512 & manual trigger modes ✅ Safety Certified: Leak-proof seals + 200W overload protection Parameter Specifications Power Input 200W ±5% Voltage AC 110-240V 50/60Hz Pressure Output 6MPa (870PSI) Nozzle Adjustment 270° Manual Rotation Shipping Weight 11kg (24.25lbs) Dimensions 35×30×35cm Professional Configuration ✓ Dual-Nozzle Main Unit✓ 3m DMX Control Cable✓ 19mm High-Pressure Hose✓ Universal Power Cord*CO₂ Tanks Sold Separately Operational Notes ➤ Requires 19mm US Thread CO₂ Tanks ➤ DMX Mode: Channel 1 (Trigger) + Channel 2 (Duration) ➤ 15-Minute Cool Down Cycle Between Activations Safety Advisory Always switch control mode BEFORE connecting/disconnecting tanks.Minimum 2m clearance required from flammable materials during operation.

Read more less